NWSL 45-4 HO Scale The Puller Tool

$59.00
RRP $69.00
SAVE $10.00 (14%)
Sold Out


Calculate Shipping

A rigid precision tool for removing wheels, drivers and gears from axles and shafts. Designed for HO Scale modeling, but handles larger and smaller scales.

Capacity: axles 1.6mm to 3.2mm drivers, wheels and gears up to 41mm outside diameter. Maximum press depth 25mm. Puller comes complete with two press screws and V-plate,
Allen wrench and operation suggestion:  Allen wrench is not usually needed as finger pressure is adequate in most cases.

(45-4)

SKU 45-4
Brand NWSL
Shipping Weight 0.1300kg
Shipping Width 0.090m
Shipping Height 0.150m
Shipping Length 0.060m

We Also Recommend


The Puller II
15% OFF RRP $64.50
Pin Extractor Press 1mm

Pin Extractor Press 1mm

$7.68

19% OFF RRP $9.45
The Puller III - Large

The Puller III - Large

$109.00

16% OFF RRP $129.00
HO/OO Ballast Spreader w/Shut Off
9% OFF RRP $54.40

More From This Category


DETAIL SANDER 320 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
18% OFF RRP $6.65
DETAIL SANDER Stick Green w/320 Grit Belt 6.35mm x 150mm
6% OFF RRP $10.55
DETAIL SANDER 240 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
18% OFF RRP $6.65
DETAIL SANDER 400 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
18% OFF RRP $6.65
DETAIL SANDER 600 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
18% OFF RRP $6.65
DETAIL SANDER 120 Grit Replacement Sanding Belts (2) 6.35mm x 150mm
18% OFF RRP $6.65
DETAIL SANDER Stick Red w/120 Grit Belt 6.35mm x 150mm
6% OFF RRP $10.55
2.0 x 5mm x 0.4 Countersunk Machine Screws (100/pkg)
8% OFF RRP $21.70
The Puller III - Large

The Puller III - Large

$109.00

16% OFF RRP $129.00
Single Edge Repl. Blades (5)

Single Edge Repl. Blades (5)

$2.50

16% OFF RRP $2.98